DUSTHUNTER SB100
Техническая информация
-
Dust Measuring Devices Scattered light dust measuring device Model Name DUSTHUNTER SB100 The DUSTHUNTER SB100 is an approved measuring device for dust at very low to medium concentrations in challenging applications, e.g. in hot or corrosive gases. The measurement is based on the backward scattering of light. Installation is made from one side only. Two different penetration depths are possible. Automatic compensation of background radiation, therefore no light absorber necessary. An automatic check of zero and reference point as well as contamination monitoring is integrated in the device.
At a glance
For very low to medium dust concentrations One-side installation Contamination check Automatic check of zero and reference point Automatic compensation of background radiation, therefore no light absorber necessary For medium to large duct diameters Your benefits
Easy installation, commissioning, and operation Measurement independent of gas velocity, humidity and particle charge Approved according to EN 15267 Low maintenance due to self-monitoring Fields of application
Emission monitoring of power stations and waste incineration plants Monitoring of filter plants Monitoring of dust loads in factory workshops Control of fresh air supplies and exhaust air plants Note
The exact device specifications and performance data of the product may deviate from the information provided here, and depend on the application in which the product is being used and the relevant customer specifications.
Technical data Measurement principles: Scattered light backward Measured values: Dust concentration (after gravimetric comparison measurement)
Scattered light intensityPerformance tested measurands: Scattered light intensity Max. number of measurands: 1 Measuring ranges: Dust concentration: 0 ... 10 mg/m3 / 0 ... 200 mg/m³ Comment: Higher measuring ranges on request Process temperature: -40 ... +600 °C Process pressure: With external purge air unit: -50 ... 30 hPa
With control unit MCU-P: -50 ... 2 hPa
other pressure ranges on requestProcess gas humidity:
non-condensingDuct diameter: ≥0.5 m Ambient temperature: Sender/receiver unit, control unit MCU-N: -40 ... +60 °C
MCU-P control unit: -40 ... +45 °C
intake temperatures for purge airConformities: 2000/76/EC
2001/80/EC
27. BImSchV
EN 14181
EN 15267
MCERTS
German Clean Air Regulations
Approved for plants requiring approvalElectrical safety: CE Enclosure rating: IP 66 Analog outputs: 3 outputs:
0/2/4 ... 20 mA, 750 Ω
electrically isolated; two additional outputs if using I/O modules (option)Analog inputs: 2 inputs:
0 ... 20 mA
not electrically isolated; two additional inputs if using I/O modules (option)Digital outputs: 5 relay contacts:
48 V, 1 A
floating; for status signalsDigital inputs: 4 floating contacts Interfaces: RS-232 (service interface)
RS-485 (via optional interface module)
Interface module (option)
USB (service interface)Bus protocol: Ethernet (via optional interface module)
MODBUS (via optional interface module)
PROFIBUS DP (via optional interface module)Operation: Via LC-display (option) or software SOPAS ET System components: Sender/receiver unit
MCU control unitTest functions: Automatic control cycle for zero and span point
Manual linearity check with reference filter
Contamination limits: at 20% warning, at 30% failureOptions: External purge air unit, I/O module(s), Interface module(s)
Заказать оригинальный Приборы измерения загрязненности DUSTHUNTER SB100 – маркировка изделия бренда SICK и с розничной ценой за штуку. Купите DUSTHUNTER SB100 по специальной цене оптом или в розницу в компании ДАНЭКС. Специальная цена распространяется на продукцию SICK для наших клиентов.
Купить с доставкой DUSTHUNTER SB100 SICK в ДАНЭКС в розницу или оптом можно по телефону, отправить заявку на почту или воспользоваться формой обратной связи на нашем сайте. Доставка по России, Казахстану, Белоруссии и в другие страны СНГ.
Подобрать аналоги для Приборы измерения загрязненности SICK или других брендов и уточнить актуальную цену на DUSTHUNTER SB100 вы сможете, написав нам E-mail или позвонив нам по телефону номеру, указанному на каждой странице.
Скачать
- Документация
- Инструкция
- Сертификаты и декларации
- Поиск описания DUSTHUNTER SB100 на сайте проиводителя тут
Доставка
Самовывоз
- FCA г. Санкт-Петербург склад Продавца
Транспортной компанией
- Деловые Линии
- СДЭК
Гарания
- Гарантийный срок на поставляемый Товар составляет 12 месяцев с момента получения Товара Покупателем, если иной срок не установлен в паспортах и сертификатах на Товар.