GM35
Техническая информация
-
Gas Analyzers In-situ gas analyzer for carbon monoxide, carbon dioxide and water Model Name GM35 Simultaneously or as individual measurements, the GM35 gas analyzer measures CO2, H2O and CO or N2O as well as temperature and pressure quickly, easily and economically. Due to its in-situ measurement technology, the GM35 detects the measuring values directly in the gas stream without gas sampling. Reliability, precision and short response time of the analyzer offer a key advantage for efficient control loops in all CO and CO2 generating processes.
At a glance
Dynamic humidity correction Fast in-situ measurement directly in the process Simultaneous determination of up to three gas components, temperature and pressure No gas sampling and conditioning Gas testable version of measuring probe available Integrated self test and control functions Your benefits
Dynamic humidity measurement directly in the process Provision of real humidity reference values Unbiased measuring values due to in-situ measurement Fast or short-term fluctuations in the process are being detected Representative measurement by selection of an appropriate probe or cross-duct type Fields of application
Emission monitoring according to EN 14181, e.g. in power or cement plants Control of the water-injection upstream of the electrostatic precipitator Monitoring of the combustion efficiency in hazardous waste incineration Process monitoring in urea production Tube rupture detection in heat exchangers Note
The exact device specifications and performance data of the product may deviate from the information provided here, and depend on the application in which the product is being used and the relevant customer specifications.
Technical data Measurement principles: Gas filter correlation, Interference filter correlation Measured values: CO, CO2, H2O, N2O Max. number of measurands: 3 Performance tested measurands: CO, CO2, H2O Measuring ranges: CO: 0 ... 180 ppm / 0 ... 20,000 ppm
CO2: 0 ... 22.5 Vol.-% / 0 ... 100 Vol.-%
H2O: 0 ... 25 Vol.-% / 0 ... 100 Vol.-%
N2O: 0 ... 60 ppm / 0 ... 2,500 ppmComment: Cross-duct and GMP version are type approved
Measuring ranges depend on device version
Measuring ranges refer to 1 m measuring pathLength of measuring path: Cross-duct version: 0.7 ... 11.5 m
distance flange - flange, Gas-testable measuring probe (GPP): 0.25 ... 1 m, Open measuring probe (GMP): 0.25 ... 1.75 mProcess temperature: Cross-duct version: 0 ... +500 °C
Measuring probe version: 0 ... +430 °C
versions for higher temperatures on request
N2O: 0 ... +180 °CProcess pressure: Cross-duct version:
depending on purge air supply
Gas-testable measuring probe (GPP): ≤250 hPa
Open measuring probe (GMP): ≤120 hPaProcess gas humidity: 0 ... 100 %
relative humidityDust load: Gas-testable measuring probe (GPP): 0 ... 30 g/m3, Open measuring probe (GMP), cross-duct version: 0 ... 2 g/m3
depending on dust propertiesAmbient temperature: -40 ... +55 °C
versions for other temperatures on requestAmbient humidity: 0 ... 96 %
relative humidity; bedewing of optical surfaces not permittedConformities: 2000/76/EC
2001/80/EC
27. BImSchV
EN 14181
GOST
MCERTS
German Clean Air RegulationsEx-approvals ATEX: Ex-version for Zone 2 on request Electrical safety: CE Enclosure rating: IP 66 / NEMA 4x Analog outputs: 3 outputs:
0/4 ... 20 mA, 500 Ω
electrically isolated; freely programmableAnalog inputs: 2 inputs:
0 ... 20 mA, 100 Ω
preset for pressure and temperatureDigital outputs: 3 relay contacts:
48 V AC, 1 A, 60 W / 48 V DC, 1 A, 30 W
preset for failure, maintenance and functional controlDigital inputs: 3 inputs:
24 V
for connection of floating contacts (check cycle, two unassigned)Interfaces: RS-232 (service interface) Bus protocol: CAN (internal system bus) Operation: Menu-driven operation via evaluation unit Device version: Cross-duct version
Measuring probe versionSystem components: AWE evaluation unit
Measuring probe or reflector unit
Sender/receiver unitTest functions: Automatic control cycle for zero and span point
Заказать оригинальный Газоанализаторы GM35 – маркировка изделия бренда SICK и с розничной ценой за штуку. Купите GM35 по специальной цене оптом или в розницу в компании ДАНЭКС. Специальная цена распространяется на продукцию SICK для наших клиентов.
Купить с доставкой GM35 SICK в ДАНЭКС в розницу или оптом можно по телефону, отправить заявку на почту или воспользоваться формой обратной связи на нашем сайте. Доставка по России, Казахстану, Белоруссии и в другие страны СНГ.
Подобрать аналоги для Газоанализаторы SICK или других брендов и уточнить актуальную цену на GM35 вы сможете, написав нам E-mail или позвонив нам по телефону номеру, указанному на каждой странице.
Скачать
- Документация
- Инструкция
- Сертификаты и декларации
- Поиск описания GM35 на сайте проиводителя тут
Доставка
Самовывоз
- FCA г. Санкт-Петербург склад Продавца
Транспортной компанией
- Деловые Линии
- СДЭК
Гарания
- Гарантийный срок на поставляемый Товар составляет 12 месяцев с момента получения Товара Покупателем, если иной срок не установлен в паспортах и сертификатах на Товар.